-
Contains Rare Parts
-
Contains Rare Parts
-
Contains Rare Parts
-
Contains Rare Parts
-
Contains Rare Parts
-
Contains Rare Parts
-
Contains Rare Parts
Ferrari Purosangue (Motorised)
Ferrari Purosangue (Motorised)
MOC-180732-1


Couldn't load pickup availability
If MOC is motorized, please read the description to check the electronics required. We only supply LEGO® electronics but not those made by BuWizz or other companies.
- 4061 Pieces
- brictric
Description
Description
Change Log:
* new V2 with 2 buggy motors in the back (RWD) & trunk cover opening/closing with tailgate.
This is Ferraris first SUV named Purosangue ("full blood"). It has a V12 engine with 725 horse power, which - to my opinion - is a little bit crazy, but still OK for me;-). The car has 2 seatrows and the doors in the second row are opening the other way round.


I wanted to make as less compromises as possible when designing the brick version of it. One of my targets was to a full second seat row in the model. So I had to move the technic components near to the axles or even as part of the axle construction as with the 8+N+R-speed Sequential Gearbox. The gearbox is driving the fake motor in the front, but not the car itself, as the gearbox cant take the full torque of the motor.
V1 (one buggy motor):

V2 (two buggy motors):

I wanted that this model is not only a display item but can also be played with. So I put one servo motor inside for steering and two buggy motors for powering the car (and in parallel the fake motor through the gearbox). Attention: motors, remote control und cables are not included in the parts list, as they are your decision, but I strongly recommend BuWizz 2.0 bundle (2 buggy motors including remote control & battery) as the model is quite heavy and the tires are "big boots". You wont believe how they are pushing this 1:8 model;-))
Specifications:
* Parts: 4061
* Scale: 1:8
* L/W/H in cm: 61,4 / 28,1 / 19,0
* Weight: ~ 3,2 kg



Functions:
* Front side doors sliding/opening
* Back side doors sliding/opening (back)
* Bonnet and tailgate to open
* Trunk cover opening/closing with tailgate
* Suspension front and rear
* V12 fake motor block in red
* 8+N+R Gearbox (driving the fake motor via one of the buggy motors)
* Gear shifting via lever at the steering board
* Steering (incl. movement of steering wheel) motorised
* Motorisation of model with 2 buggy motors (BuWizz 2.0 bundle recommended)

Special thanks go to:
* Anto for his ultra compact 8+N+R-speed Sequential Gearbox I used (Link)
* Janotechnoc for his motor block design I used (Link)
Following this link you will find all part lists (V1, V2 and a delta list V1/V2): brictric Ferrari Purosangue part lists
I provide instructions for both V1 and V2.
This model shares approx. 63% of parts with Ferrari Daytona SP3 (42143-1). Comparison link see below.




More pictures on https://flic.kr/ps/44fUtxFlickr
I wish you an enjoyable build and pleasure with the result.
Instruction change log:
* 2024.04.25: Step 186: driving ring extension was installed the wrong way. Book1 corrected. Many thanks to Brumm1953
Designer's Social Media: instagram.com/brictric
Have questions about this MOC? Email us at mocboxing@gmail.com. *MOC descriptions match the descriptions on Rebrickable, but they may contain inaccuracies. All MOCs are used with permission from each designer.
Share
Frequently Asked Questions
Got a question? We are here to answer!
You’ll receive all the genuine LEGO parts needed to build the model, along with a digital instruction manual. Some sets also include custom packaging or thank-you notes.
Yes, you will get a piece of paper with your order that has a QR code link, that sends you to a digital instruction manual created by the MOC designer. We can print instructions at an extra cost, send us an email at MOCBoxing@Gmail.com for further inquiries.
We offer both used or new depending on your budget. When you buy new, we guarantee the highest fresh quality of bricks. When you buy used we try our hardest to get you used bricks above a certain quality threshold.
Currently, we focus on full kits including both bricks and instructions. We may offer instructions-only in the future. If you want us to help you out with finding the best places, or maybe even printing out the instructions , drop us an email and we'll gladly help you out.
Yes, we guarantee that every brick we use is 100% genuine LEGO. We know how important quality is to builders, which is why we only source official LEGO parts—never third-party or imitation bricks. You can build with confidence, knowing your set will meet the durability, precision, and standard you expect from LEGO.
Shipping costs are a flat rate of $20 for orders within the US (This does not change depending on amount of MOCs bought.) For international orders, it varies and will be calculated at checkout.
We currently don't offer returns due to us being on demand fulfillment, and don't have a place to send products back to. But in the event you are not pleased with your product or are having issues, send us an email and we will give our full support and if needed a full refund.