X-17 Riot Control Mech Suit
X-17 Riot Control Mech Suit
MOC-186265-1
Regular price
$68.99 USD
Regular price
Sale price
$68.99 USD
Unit price
per
Shipping calculated at checkout.
Couldn't load pickup availability
If MOC is motorized, please read the description to check the electronics required. We only supply LEGO® electronics but not those made by BuWizz or other companies.
- 476 Pieces
- 2024
- Moc_Lobster
Other
- 55
Designer's Social Media: https://www.instagram.com/moc_lobster/
X-17 Riot control model.
Disclaimer - in the instructions, the arms use parts 66956 in dark grey, but the parts list contains parts (29119 & 21120) instead. Due to a recurring issue with Stud.io, the instructions won't save properly so I have been unable to update them accordingly. Just be aware that you'll use 1x 29119 and 1x 29120 instead of 1x 66956 on the outer forearms, as the instructions suggest. It should be obvious, as those 2 parts make the other part, but if it isn't please feel free to message me.
A highly customisable, sturdy mech suit. The weaponry can be switched out to just about anything you can think of, but as standard it comes with a repulsor cannon in the right hand, rocket propelled tear gas grenades under the shoulder plates, automated turrets loaded with bean bag rounds above the cockpit and thruster modules in the rear shoulder plates to assist with mobility. All weapons have a transforming feature in that most can be folded away (including the shoulder mounted spotlights) and the repulsor cannon has a spread mode and a focused firing mode.
There is a slight difference in the pictures and the finished model, in that the rear thrusters are a slightly better design in the finished model. They were a bit basic in the model pictured. This was an oversight on my part, but it's barely noticeable, and actually makes the rear shoulder plates look better when the thrusters are not in use.
Disclaimer - in the instructions, the arms use parts 66956 in dark grey, but the parts list contains parts (29119 & 21120) instead. Due to a recurring issue with Stud.io, the instructions won't save properly so I have been unable to update them accordingly. Just be aware that you'll use 1x 29119 and 1x 29120 instead of 1x 66956 on the outer forearms, as the instructions suggest. It should be obvious, as those 2 parts make the other part, but if it isn't please feel free to message me.
A highly customisable, sturdy mech suit. The weaponry can be switched out to just about anything you can think of, but as standard it comes with a repulsor cannon in the right hand, rocket propelled tear gas grenades under the shoulder plates, automated turrets loaded with bean bag rounds above the cockpit and thruster modules in the rear shoulder plates to assist with mobility. All weapons have a transforming feature in that most can be folded away (including the shoulder mounted spotlights) and the repulsor cannon has a spread mode and a focused firing mode.
There is a slight difference in the pictures and the finished model, in that the rear thrusters are a slightly better design in the finished model. They were a bit basic in the model pictured. This was an oversight on my part, but it's barely noticeable, and actually makes the rear shoulder plates look better when the thrusters are not in use.
Have questions about this MOC? Email us at mocboxing@gmail.com. *MOC descriptions match the descriptions on Rebrickable, but they may contain inaccuracies. All MOCs are used with permission from each designer.
View full details
